How To Draw A Circle On A Cylinder In Solidworks
SolidWorks Exercises-1: Circle Sketch and Extrude Boss Feature
For learning SolidWorks features in detail, need to do some exercises with each feature tools. This post is virtually SolidWorks Exercises for creating different shapes using extrude dominate tool and circle. Here I am going to evidence basic 3D shapes such as cylinder and cone. In each shape tutorial, I volition prove the different applications of extrude boss/base of operations belongings manager also.
3D Cylinder Practise
Dimensions of Cylinder: Diameter = l mm and Length = 100 mm
Stride-one
Create a New Role File and Select the any plane. Here I'm select the "Elevation Plane", similar all other previous tutorial.
Checkout Best SolidWorks Training Materials hither.
Step-2
For creating a cylinder using extrude boss, need a circumvolve sketch contour. If you do not know, how to do information technology, run across SolidWorks Circumvolve Drawing Tutorial here.
Related SolidWorks Features Tools Tutorials:-
- SolidWorks Extrude Cutting Tutorial
- SolidWorks Revolved Boss/Base of operations Tutorial
- SolidWorks Revolved Cut Tutorial
- SolidWorks Swept Dominate/Base Tutorial
- SolidWorks Swept Cut Tutorial
- SolidWorks Loft Boss/base Tutorial
- SolidWorks Loft Cutting Tutorial
- Solid Works Boundary Boss/Base of operations Tutorial
- Solid Works Boundary Cut Tutorial
- Solid Works Linear Design Feature
- Solid Works Typhoon Tutorials
- Solid Works Rib Tutorials
- Solid Works Pigsty Wizard Tutorials
- Solid Works Unproblematic Hole Tutorials
- Solid Works Chamfer Tutorials
- Solid Works Fillet Tutorials
- Solid Works Beat Tutorials
Using Circle button, draw information technology on the sketch surface area and so use the smart dimension to set the bore of the circumvolve is fifty mm, which is shown in the figure below.
Step-three
"Exit the Sketch" and Select the "Sketch-i" from the Featuremanager design tree. And then go to "feature control manager" and select the "Extrude dominate/base of operations" button from it.
Pace -4
Then you tin can see lite yellowish color preview of cylinder or circumvolve extrusion with Extrude boss property manager.
So concluding 3D cylinder of dimension 50mm diameter and 100 mm length will expect like on the below mail.
3D Cone Exercise
Here I'chiliad going to catechumen previously created 3D cylinder into a 3D cone, without changing its dimensions. You tin can create cone by using Revolved boss will talk over later. Allow united states of america see exercise for creating 3D cone using Extrude dominate/base of operations characteristic.
If you lot desire to create cylinder in new part file, Follow Step one to 4 in the previous tutorial.
Here I going to edit the 3D cylinder extrude dominate.
For editing the features, go to featuremanager pattern tree and select the Extrude Boss.
Click correct button of your mouse, then yous can see a menu. From that select "Edit Feature".
Then the Boss Extrude property manager will again appear. From that click on "Draft on/off" button. Then you demand to enter the draft angle in next column which is shown in the figure.
To go draft bending, you know the cylinder acme (100 mm) and radius (25 mm).
Past using trigonometry, tan Ө = 25/100. So Ө = tan^-ane (four) = 14 degree draft found by calculation.
You lot can also click on the "typhoon Outward" pick at same draft angle which is shown below.
The draft inward go 3D cone as final.
Related SolidWorks Sketch Tools Tutorials:-
- Rectangle Sketch Tool Tutorial
- Line Sketching Tool Tutorial
- Polygon Sketch Tool Tutorial
- Arc Sketch Tool Tutorial
- Slot Sketch Tool Tutorial
- Ellipse Sketch Tool Tutorial
- Parabola Sketch tool
- Spline Sketch Tool Tutorial
- Sketch fillet Tool Tutorial
- Sketch Chamfer tool Tutorial
- Sketch Trim Entities Tutorial
- Linear Sketch pattern Tutorial
- Circular Sketch Pattern Tutorial
Source: https://solidworkstutorialsforbeginners.com/solidworks-exercises-extrude-boss-1/
Posted by: williamsalannow.blogspot.com
0 Response to "How To Draw A Circle On A Cylinder In Solidworks"
Post a Comment